Vitals - Withings - BP Cuff
Written by Rahul KC
Updated at June 26th, 2025
- FAQs
-
Using Zemplee
Daily Activity - the new Vital Sign Vitals Data Alerts and Alert Settings Notifications (for Care Teams, Family Contacts, and Admin) Analytics and the Overview Page RPM Compliancy Tracking Members Zemplee on Alexa Care Teams Getting Started Resources For Clinical Team and Care Team Resources For Administrators Sensor/ Device Kits Organization
- Installing Zemplee
- Integrations
- Health Education
- What's New
- Support KB
Manufacture Name: BPM Connect
Zemplee Name: BP Cuff
Zemplee Master Install Document
Set up Instructions
- Place the BP Cuff close to the data hub at a minimum distance of 15 feet and in the same room.
- Press and hold the button and the BP Cuff will then set up automatically with the Data Hub. Synchronization between the two devices should not take more than 10 minutes. This will be indicated by the data hub flashing green
- An update on the BP Cuff may occur and this will be indicated by a progress bar on the BP Cuff. Once the data hub led is a solid green, the BP Cuff has connected to the data hub.
- To confirm that your blood pressure monitor has successfully synced to the Data Hub, a check mark on the screen plus a green color next to the button should be displayed.
How to take measurements
- Unroll the cuff and ensure the cuff is threaded through the metal buckle as pictured.
- Position your left arm inside the cuff with the button close to the inside of your elbow.
- Ensure the cuff is firmly wrapped around your arm.
- Keep your feet firmly on the ground and your arm resting on the table with the cuff at heart level. Ensure the tube is not touching your chest.
- Turn on the blood pressure monitor with a short press of the button. You should see "BP" on the display.
- Give the button a second short press to begin a measurement. When it is completed, the results will appear on the monitor's display.
Pro-Tip
- If the battery icon is displayed on the screen, please charge the device with the cable provided. BPM Connect charges via USB and lasts for up to 6 months on a single charge.
- If the check mark and green light does not appear during the connection with the data hub, turn off the BP Cuff by holding the button and initiate the connection process again.
